Télécharger Imprimer la page

Duratech HOT Splash HS40 Manuel page 5

Publicité

Les langues disponibles
  • FR

Les langues disponibles

All feeding of water treatment to the pool water has to be done downstream of the heat pump(2)
It is normal for condensation to come out of the heat pump. This is not a leak or fault with the unit. If the
humidity is very high, the condensation could be a number of liters a day.
4.2. Hose connection.
Step 1
It is normal for condensation water to come out of the heat pump when it is operating. This is not a fault or
leak!
4.3. Electrical connection
Hot Splash
Heat pump RCD. Available
in EU-VERSION and UK-
VERSION
Make sure your outlet is earthed.
The pool circulation pump must operate with the heat pump. Therefore, connect them to the same circuit
used for outdoor.
4.4. Electrical connection with timer
Your typical swimming pool configuration can be controlled using a timer. Please contact your service centre or
similarly qualified persons to change the RCD into a standard electrical plug. A timer can be put in between the
heat pump AND pool circulation pump once a standard electrical plug is installed.
Using a timer; The heat pump and pool circulation pump will start up automatically as soon as power is broken
and restored. The heat pump remembers its last status and starts up with last remembered settings.
The pool circulation pump must operate with the heat pump. Therefore, connect them to the same circuit
used for outdoor.
Step 2
Outdoor socket
Circulation pump
5

Publicité

loading