T o o l s
Push to talk
Push to talk (PTT) (network service) provides direct voice communication with the push of a key. With push to talk, you can use
your device as a walkie-talkie.
1. To edit
Push to talk
(PTT) (network service) settings, select
your available network operators. If the device detects more than one network operators, select one and OK.
If the network operator is not recognized, you must select
2. Some operators require a
User
and select OK.
3. Select
Options
OK
when you are finished.
>
4. Select
OK
to confirm that you want to set up PTT for the specified operator.
To use PTT, you must have an active packet data account. Contact your network operator or service provider for details.
If an access point has not been set up for the selected operator, you are prompted to create a new one.
Operator
To edit operator settings (access points, Web browser, MMS, and streaming), select
wizard
detects your available network operators. If the device detects more than one network operators, select one and OK. If
the network operator is not recognized, you must select
If you are not able to use
Sett.
Application manager
Select
Menu
Tools
Application
>
>
When you open the application manager, you see all the software packages that have been installed, with their name, version
number, type, and size. You can view the details of installed applications, remove them from your device, and specify installation
settings.
Install applications and software
Important: Only install applications from sources that offer adequate protection against harmful software.
You can install two types of applications and software on your device:
• Applications and software specifically intended for your device or compatible with the Symbian operating system. These
software installation files have the extension .sis.
• J2ME™ applications compatible with the Symbian operating system. The Java application installation file extensions are .jad
or .jar.
Installation files may be transferred to your device from a compatible computer, downloaded during browsing, or sent to you
in a multimedia message, as an e-mail attachment, or with Bluetooth. If you use Nokia PC Suite to transfer a file to your device,
save the file in the C:\nokia\installs folder in your device.
During installation, the device checks the integrity of the package to be installed. The device shows information about the checks
being carried out, and you are given options to continue or cancel the installation.
If you install applications that require a network connection, note that the power consumption of your device may increase
when you use these applications.
View and remove software
You can view the details of installed applications or remove them from your device.
To view the details of an installed software package, select the application and
To remove software, open the application manager main view and select
If you remove software, you can only reinstall it by using the original software package file, or by restoring a full backup that
contains the removed software package. If you remove a software package, you may no longer be able to open files created
with that software. If another software package depends on the software package that you removed, the other software package
may stop working. Refer to the documentation of the installed software package for details.
View the installation log
To view the installation log, select
of installation or removal. If you encounter problems with the device after installing a software package, you can use this list
to find out which software package may be the cause of the problem. The information in this list may also help to pinpoint
problems that are caused by software packages that are incompatible with each other.
Copyright © 2006 Nokia. All Rights Reserved.
All manuals and user guides at all-guides.com
name, Password, and Nickname. Select each in turn and
Country/Region
wizard, visit the Nokia phone settings Web site at www.nokia.com.
manager.
Options
View
log. A list shows what software has been installed and removed, and the date
>
Menu
Tools
Sett. wizard
>
>
>
Country/Region
and Operator.
Options
Menu
Tools
>
and Operator.
Options
View
>
Options
> Remove.
83
Push to
talk.
Sett. wizard
detects
> Change. Enter the details,
Sett. wizard
> Operator.
Sett.
>
details.