Nokia E70 Mode D'emploi page 72

S e t t i n g s
Data call settings
Select Menu Tools Settings
> >
To set the time-out period after which data calls automatically end if no data has been transferred, select
the joystick. Select User defined
Disconnect.
VPN
VPN access points
To manage VPN access points, select
Edit — Edit the selected access point. If the access point is in use or its settings are protected, you cannot edit it.
•
New access point — Create a new VPN access point.
•
Delete — Delete the selected access point.
•
VPN access point settings
Contact your service provider for the correct access point settings.
To edit VPN access point settings, select the access point and Options.
Select from the following options:
Connection name — Enter a name for the VPN connection. The maximum length of the name is 30 characters.
•
VPN policy — Select a VPN policy to be used with this access point.
•
Internet access pt. — Select the Internet access point to be used with this VPN access point.
•
Proxy serv. address — Enter the proxy server address of this VPN access point.
•
Proxy port number — Enter the number of the proxy port.
•
Wireless LAN
Select Menu Tools Settings
> >
To have an indicator displayed when there is a wireless LAN available in your current location, select
To select the time interval for your device to scan for available wireless LANs and update the indicator, select
networks. This setting is not visible unless you select
Advanced WLAN settings
Select Menu Tools Settings
> >
are normally defined automatically, and changing them is not recommended.
To edit the settings manually, select
Long retry limit — Enter the maximum number of transmission attempts if the device does not receive a receiving
•
acknowledgement signal from the network.
Short retry limit — Enter the maximum number of transmission attempts if the device does not receive a clear-to-send signal
•
from the network.
RTS threshold — Select the data packet size at which the wireless LAN access point device issues a request to send before
•
sending the packet.
TX power level — Select the power level of your device when sending data.
•
Radio measurements — Enable or disable the radio measurements.
•
To restore all settings to their original values, select
Security settings for wireless LAN access points
WEP security settings
Select Menu Tools Settings
> >
Options > Edit.
In the access point settings, select
Wired equivalent privacy (WEP) encryption method encrypts data before it is transmitted. Access to the network is denied to
users who do not have the required WEP keys. When WEP security mode is in use, if your device receives a data packet not
encrypted with the WEP keys, the data is discarded.
In an Ad-hoc network, all devices must use the same WEP key.
Select from the following settings:
WEP key in use — Select the desired WEP key.
•
Authentication type — Select
•
WEP key settings — Edit the settings for the WEP key.
•
Copyright © 2006 Nokia. All Rights Reserved.
All manuals and user guides at all-guides.com
Connection Data call.
> >
to enter the time yourself or Unlimited
VPN VPN access points
>
Connection Wireless LAN.
> >
Show availability
Connection Wireless LAN
> > >
Automatic config. > Disabled, and define the following settings:
Options
>
Connection Access points. Select
> >
WLAN security mode > WEP.
Open or Shared.
to keep the connection active until you select
Options and from the following options:
>
> Yes.
Options Advanced settings. The wireless LAN advanced settings
>
Restore defaults.
Options New access point; or select an access point and
>
72
Online time, and press
Options
>
Show availability > Yes.
Scan for