G e t s t a r t e d
About the display
A small number of missing, discolored, or bright dots may appear on the screen. This is a characteristic of this type of display.
Some displays may contain pixels or dots that remain on or off. This is normal, not a fault.
Standby modes
Your device has two different standby modes: standby mode and active standby mode.
Active standby mode
After you have switched on your device and it is ready for use, but you have not entered any characters or made other selections,
the device is in the active standby mode. In the active standby mode, you can view your service provider and network, different
indicators such as indicators for alarms, and applications you want to access fast.
To select applications that you want to access from active standby, select
and press the joystick. Scroll to the desired application, and press the joystick.
To activate standby, select
Menu
Tip: You can also see the messages in a messaging folder such as inbox or mailbox in the active standby mode. Select
Menu
Messag.
Options
>
>
Standby mode
In the standby mode, you can see different information, such as your service provider, time, and different indicators, such as
indicators for alarms.
The picture shows a the display in the standby mode.
1 — Service provider
2 — Signal strength indicator
3 — Command for left selection key
4 — Command for right selection key
5 — Battery strength indicator
Shortcuts in standby mode
In the standby mode, you can use the following shortcuts. These shortcuts are usually not available in the active standby mode,
where the joystick is used for normal scrolling.
To view the most recently dialed numbers, press the call key. Scroll to a number or name, and press the call key again to call the
number.
To call your voice mailbox (network service), press and hold 1.
To view calendar information, scroll right.
To write and send text messages, scroll left.
To open the contacts list, press the joystick.
To change the profile, press the power key briefly, scroll to the profile you want, and press the joystick to activate the profile.
To open
Services
and connect to the Web, press 0.
To activate the camera, scroll up with the joystick.
To change these shortcuts, select
Copyright © 2006 Nokia. All Rights Reserved.
All manuals and user guides at all-guides.com
Tools
Settings
Phone
Standby mode
>
>
>
>
Settings
Other
and the folders in
>
>
Menu
Tools
Settings
Phone
>
>
>
13
Standby
apps. Scroll to the different shortcut settings,
Active standby
> Off.
>
Active standby
mode.
Standby
mode.
>