Nokia E70 Mode D'emploi page 73

S e t t i n g s
WEP key settings
Select Menu Tools Settings
> >
Options > Edit.
In the access point settings, select
In an Ad-hoc network, all devices must use the same WEP key.
Select WLAN security sett. WEP key settings
>
WEP encryption — Select the desired WEP encryption key length.
•
WEP key format — Select whether you want to enter the WEP key data in
•
WEP key — Enter the WEP key data.
•
802.1x security settings
Select Menu Tools Settings
> >
Options > Edit.
In the access point settings, select
802.1x authenticates and authorizes devices to access a wireless network and prevents access if the authorization process fails.
Select WLAN security sett.. and from the following settings:
WPA mode — Select EAP (Extensible Authentication Protocol) or
•
EAP plug-in settings — If you selected
•
access point.
Pre-shared key — If you selected
•
wireless LAN to which you connect.
The settings available for editing may vary.
WPA security settings
Select Menu Tools Settings
> >
Options > Edit.
In the access point settings, select
Select WLAN security sett.. and from the following settings:
WPA mode — Select EAP (extensible authentication protocol) or
•
EAP plug-in settings — If you select
•
point.
Pre-shared key — If you select
•
wireless LAN to which you connect.
TKIP encryption — To enable TKIP encryption, based on transient keys changed often enough to prevent misuse, select
•
Allowed. All devices in the wireless LAN must either allow or prevent the use of TKIP encryption.
The settings available for editing may vary.
EAP
To view the EAP (extensible authentication protocol) plug-ins currently installed in your device (network service), select
Tools Settings Connection
> >
LAN as a data bearer and 802.1x
EAP plug-in settings, and press the joystick.
EAP settings
Select Menu Tools Settings
> >
Options > Edit.
Select WLAN security mode 802.1x
>
Select WLAN security sett. WPA mode
>
The extensible authentication protocol (EAP) plug-ins are used in wireless networks to authenticate wireless devices and
authentication servers, and the different EAP plug-ins make possible the use of various EAP methods (network service).
To use an EAP plug-in when you connect to a WLAN using the access point, select the desired plug-in and
EAP plug-ins enabled for use with this access point have a check mark next to them. To not use a plug-in, select
Disable.
To edit the EAP plug-in settings, select
To change the priority of the EAP plug-in settings, select
ins when connecting to the network with the access point, or
authentication after attempting to use other plug-ins.
The available options may vary.
Copyright © 2006 Nokia. All Rights Reserved.
All manuals and user guides at all-guides.com
Connection Access points. Select
> >
WLAN security mode > WEP.
and from the following settings:
Connection Access points. Select
> >
WLAN security mode > 802.1x.
WPA mode > EAP, select which EAP plug-ins defined in your device to use with the
WPA mode Pre-shared
>
Connection Access points. Select
> >
WLAN security mode > WPA/WPA2.
WPA mode > EAP, select which EAP plug-ins defined in your device to use with the access
WPA mode Pre-shared key, enter the shared private key that identifies your device to the
>
Access points. Select Options
>
or WPA/WPA2 as their security mode. Select
Connection Access points. Select
> >
or WPA/WPA2.
> EAP, scroll to EAP plug-in
Options > Configure.
Options
Options New access point; or select an access point and
>
ASCII or Hexadecimal
Options New access point; or select an access point and
>
Pre-shared key (a secret key used for device identification).
key, enter the shared private key that identifies your device to the
Options New access point; or select an access point and
>
Pre-shared key (a secret key used for device identification).
New access point and define an access point that uses wireless
>
WLAN security sett.
Options New access point, or select an access point and
>
settings, and press the joystick.
Raise priority to attempt to use the plug-in before other plug-
>
Options Lower priority to use this plug-in for network
>
73
format.
Menu
>
WPA mode > EAP, scroll to
>
Options > Enable. The
Options
>