Publicité
Les langues disponibles
Les langues disponibles
16
6.3.2 WMFE2, WMFE3 AND WMFE4
To extinguish the fl ames pull the shut-off key from the magnet located underneath the appliance. Position the
slot on the key over the fl ame diverter handle (under the glass fender) and pull forward until closed.
7.0 MAINTENANCE
NEVER CLEAN THE BURNER IF IT STILL CONTAINS FUEL. LIGHT AND BURN OFF ANY FUEL
It is recommended that the empty burner housing be cleaned after every use using a soap and warm water
solution. The burner housing must be completely dry before refi lling.
Manufacturer is not responsible for damages caused by the use of inappropriate cleaning products.
7.1
CARE OF STAINLESS STEEL
Stainless steel tends to oxidize or stain in the presence of chlorides and sulfi des, particularly in coastal areas
and other harsh environments, such as the warm, highly humid atmosphere around pools and hot tubs. These
stains could be perceived as rust, but can be easily removed or prevented. To provide stain prevention and
removal, wash all stainless steel surfaces every 3-4 weeks or as often as required with fresh water and/or
stainless steel cleaner.
CLEANING THE STAINLESS STEEL SURFACE:
Do not use abrasive cleaners or steel wool on the stainless steel parts. Doing so will scratch the fi nish. Sur-
faces should be cleaned with warm soapy water while the metal is still warm to the touch. To clean stainless
surfaces, use a stainless steel or non-abrasive cleaner. Always wipe in the direction of the grain. Over time,
stainless steel parts discolour when heated, usually to a golden or brown hue. This discolouration is normal
and does not affect the performance of the appliance.
W415-0958 / C / 03.01.12
All manuals and user guides at all-guides.com
MAGNET
SHUT-OFF
KEY
BEFORE CLEANING.
ALLOW BURNER / BURN POT TO COOL BEFORE CLEANING.
WARNING
!
FLAME
DIVERTER
HANDLE
81.1
Publicité
