Publicité
Les langues disponibles
Les langues disponibles
14
6.1.2 WMFE2, WMFE3 AND WMFE4
DO NOT REMOVE THE BURN POT FROM THE APPLIANCE TO FILL. MOVING THE BURN POT BACK INTO POSITION
IMPORTANT: Do not refuel the appliance when it is burning or still hot. Flames may not be readily
visible, you must always check for heat from the burner area. If there is any sign of heat, do not refuel.
NOTE: Light the appliance immediately after filling burn pot with fuel. Vapour may build up causing a
harsh ignition.
A.
Lift the glass fender assembly(s) up and out of the appliance.
B.
Position the burner slide in the fully open position.
C.
Screw the fi lling spout (provided) to the ethanol container, making sure it doesn't leak.
D.
With the spout fully extended and bent at a 90° angle, place the end of the spout into the burner
housing. Pour the fuel until it reaches the fl ame diverter. NOTE: The fl ame diverter is marked "MAX
FILL LEVEL". DO NOT OVERFILL.
GLASS
FENDER
ASSEMBLY
W415-0958 / C / 03.01.12
All manuals and user guides at all-guides.com
WARNING
!
MAY CAUSE SPILLAGE.
BURNER
SLIDE
MAX FILL
LEVEL
FULLY OPEN
FULLY
CLOSED
FLAME
DIVERTER
Publicité
