Honeywell Home R200C-1 Guide D'installation Et D'utilisation page 8

12. Warnings
This manual contains important safety information about the installation and operation of the CO alarm.
Read the manual carefully and keep it in a safe place for future reference. The CO alarm should be
installed by a competent person. Installation of a CO alarm should not be used as a substitute for proper
installation, use and maintenance of fuel burning appliances including appropriate ventilation and
exhaust systems. This CO alarm is not water resistant and is only suitable for indoor use. Do not try to
repair the CO alarm, it has the risk of electric shock or malfunction if the CO alarm is tampered with.
Do not expose the CO alarm and batteries to extreme temperatures. Some common household
substances can affect the sensitivity of the CO alarm. Do not use household cleaners, polishes, perfumes
or aerosol sprays on or close to the CO alarm. Avoid the use of nail polish remover, model paint or model
glue close to the CO alarm. This CO alarm is designed to protect individuals from the acute effects of
carbon monoxide exposure. It will not fully safeguard individuals with specific medical conditions. If in
doubt consult a medical practitioner. Long exposure to low levels (>10 ppm) of CO may cause chronic
effects. If in doubt consult a medical practitioner.
13. Specifications
Gas detected
Lifetime
Power supply
Installation
Dimensions
Weight
Audible
Sensor technology
Type of device
Operation Ambient Condition
Storage/Transport Ambient Condition
IP rating
: Carbon Monoxide
: 10 years
: Long life lithium battery, 3 V, sealed for the life of the product
(no replacement necessary)
: Wall mount, ceiling
: 95 mm x 95 mm x 25 mm
: 120 g
: ≥85 dB@3m
: Electrochemical Cell
: Type-B
: Temperature -10°C to +45°C
: Humidity 25 - 95% RH (non-condensing)
: Temperature -15°C to +50°C
: Humidity 20 - 95% RH (non-condensing)
: IP44
-8-