Télécharger Imprimer la page

Honeywell Home R200C-1 Guide D'installation Et D'utilisation page 4

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 28
1. Introduction
Thank you for purchasing this R200C-1 CO alarm (Carbon Monoxide).
The symbols above mean that the CO alarm is suitable for use in domestic premises (including static
caravan holiday homes), caravans, motor caravans and boats.
NOTE: this manual contains important safety information. Please store it for future reference.
2. Where to install the CO alarm?
Ideally, a CO alarm should be installed in every room containing a fuel-burning appliance and in a room
where the occupant(s) spend most time like the bedroom and study/hobby room.
1- Ceiling mounting / 2- Wall mounting / 3- Bedroom / 4- Study/Hobby room
3. Where not to install the CO alarm?
In an enclosed space (for example in a cupboard or behind a curtain).
Where it can be obstructed (for example by furniture).
Directly above a sink.
Next to a door or window.
Next to an extractor fan.
Next to an air vent or other similar ventilation openings.
In an area where the temperature may drop below -10 °C or exceed 45 °C.
Where dirt and dust may block the sensor.
In a damp or humid location.
In the immediate vicinity of a cooking appliance.
4. Installation (
see page 3)
If you need to enable the tamper proof locking feature, break off or cut off the small cylinder (1).
Attach (2) the wall bracket to the wall or ceiling. Fit the CO alarm onto the wall bracket (3). Press firmly
against the wall plate and slide (4) the CO alarm down. The device will be activated.
(see page 2)
-4-

Publicité

loading