Publicité
Les langues disponibles
Les langues disponibles
03
Connecting up
Microsoft, Windows Media
trademarks, or registered trademarks of Microsoft
Corporation in the United States and/or other countries.
Connecting other video
components
This receiver has audio/video inputs and
outputs suitable for connecting analog or
digital video recorders, including VCRs, DVD-
recorders and HDD recorders.
1
Connect a set of audio/video outputs on
the recorder to the DVR/VCR AUDIO and
VIDEO inputs on this receiver.
Use a stereo RCA phono cable for the audio
connection and a standard RCA video cable for
the video connection.
2
Connect a set of audio/video inputs on
the recorder to the DVR/VCR AUDIO and
VIDEO outputs on this receiver.
Use a stereo RCA phono cable for the audio
connection and a standard RCA video cable for
the video connection.
3
If your video component has a digital
audio output, connect it to a digital input on
this receiver.
The example shows a recorder connected to
the DIGITAL COAX 2 (DVR/VCR) input.
Note
1 If your video component doesn't have a digital audio output, omit this step. If it only has an optical digital output, you can con-
nect it to the optical input on this receiver using an optical cable. When you set up the receiver you'll need to tell the receiver
which input you connected the component to (see The Input Assign menu on page 30).
12
En
®
, and the Windows logo are
1
This receiver
IN
CD
IN
DVR /
VCR
OPT
1
OUT
(CD)
ASSIGNABLE
DIGITAL IN
IN
DVD
/LD
ASSIGNABLE
IN
DIGITAL IN
COAX
2
PLAY
(DVR/VCR)
IN
CD-R
/ TAPE
COAX
/ MD
1
(DVD/LD)
OUT
REC
L
AUDIO
3
2
R
IN
L
OPTICAL
COAXIAL
REC
DIGITAL OUT
AUDIO IN
DVR, VCR, LD player, etc.
Using the component video jacks
Component video should deliver superior
picture quality when compared to composite
video. A further advantage (if your source and
TV are both compatible) is progressive-scan
video, which delivers a very stable, flicker-free
picture. See the manuals that came with your
TV and source component to check whether
they are progressive-scan video compatible.
Important
• If you connect any source component to
the receiver using a component video
input, you must also have your TV
connected to this receiver's COMPONENT
VIDEO MONITOR OUT jacks.
FM UNBAL
Ω
75
AM
LOOP
ANTENNA
VIDEO
IN
TV /
OUT
SAT
IN
MONITOR
OUT
FRONT
D V D
5.1CH
SUB
INPUT
WOOFER
IN
PREOUT
1
R
OUT
L
PLAY
VIDEO IN
AUDIO OUT
VIDEO OUT
Publicité
