Pioneer VSX-517 Mode D'emploi page 18

04 Controls and displays
DIGITAL
Lights when a digital audio signal is
detected.
DTS
Lights when a source with DTS encoded
audio signals is detected.
2 DIGITAL
Lights when a Dolby Digital encoded
signal is detected.
ANALOG
Lights when an analog signal is detected.
2
Lights to indicate decoding of a DTS
multichannel signal.
2 DIGITAL
3
Lights to indicate decoding of a Dolby Digital
multichannel signal.
2 PRO LOGIC II
4
Lights to indicate Pro Logic II decoding (see
Listening in surround sound on page 22 for
more on this).
5 VIR.SB
Lights during Virtual surround back
processing (page 25).
6 DIRECT
Lights when source Stream Direct playback is
in use. Stream Direct playback bypasses the
tone controls for the most accurate
reproduction of a source.
7 AUTO SURR.
Lights when the Auto Surround feature is
switched on (see Auto playback on page 22).
8 ATT
Lights when ANALOG ATT is used to
attenuate (reduce) the level of the analog input
signal.
9 SLEEP
Lights when the receiver is in sleep mode.
18
En
10 Tuner indicators
/ MONO
Lights when the mono mode is set using
the MPX button.
/ STEREO
Lights when a stereo FM broadcast is being
received in auto stereo mode.
/ TUNED
Lights when a broadcast is being received.
11 Speaker indicator
Shows if the speaker system is on or not.
SP A means the speakers are switched on.

SP
 means the headphones are connected.
12 Character display
13 ADV.SURR (Advanced Surround)
Lights when one of the Advanced Surround
modes has been selected.
14 WMA9 Pro
Lights to indicate decoding of a WMA9 Pro
signal.
15 MIDNIGHT
Lights during Midnight listening (page 26).
16 D.E.
Lights when Dialog Enhancement is switched
on (page 26).
17 LOUDNESS
Lights during Loudness listening (page 26).
18 Master volume level