Pioneer VSX-517 Mode D'emploi page 28

06 The System Setup menu
Chapter 6:
The System Setup menu
Using the System Setup menu
The following section shows you how to make
detailed settings to specify how you're using
the receiver. It also explains how to fine-tune
individual speaker system settings.
RECEIVER
SLEEP DIMMER
INPUT SELECTOR
DVD 5.1
DVD TV DVR
CD CD-R FM
1 Press RECEIVER on the remote control,
then press the SETUP button.
Use / to select the setting you want to
2
adjust then press
• SP SETUP – Specify the size, number,
distance and overall balance of the
speakers you've connected (see Manual
speaker setup below).
• IN ASSIG. – Specify what you've connected
to the digital and component video inputs
(see The Input Assign menu on page 30).
• OTHER – Make customized settings to
reflect how you are using the receiver (see
The Other setup menu on page 31).
Manual speaker setup
These settings optimize surround sound
performance (if you're satisfied with the
settings made in Using the Quick Setup on
page 7, adjustment may not be necessary). You
only need to make these settings once (unless
you change the placement of your current
speaker system or add new speakers).
Note
1 If you select SMALL for the front speakers the subwoofer is fixed to YES. Also, the center, surround, and surround back speak-
ers can't be set to LARGE if the front speakers are set to SMALL. In this case, all bass frequencies are sent to the subwoofer.
28
En
TOP MENU MENU
S.RETRIEVER
PHASE
MIDNIGHT DIALOG E
ENTER
ONE
TOUCH
TUNER
COPY
EDIT
RECEIVER
SETUP SETUP RETURN
AM
VOLUME
ENTER.
1 Select SP SETUP from the System Setup
menu.
Use / to select the setting you want to
2
adjust then press ENTER.
• SP SET – Specify size / number of speakers
connected (see Speaker setting below).
• X.OVER – Specify which frequencies will
be sent to the subwoofer (see Crossover
network below).
• CH LEVEL – Adjust overall balance of your
speaker system (see Channel level below).
• SP DISTN. – Specify the distance of your
speakers from the listening position (see
Speaker Distance below).
3 Press RETURN after making the
adjustments necessary for each setting.
Speaker setting
Use this setting to specify your speaker
configuration (size, number of speakers).
1 Select SP SET from the SP SETUP menu.
Use / to choose the speaker(s) that
2
you want to set then select a speaker size.
Use / to select the size (and number) of
each of the following speakers:
• Front (F) – Select LARGE if your front
speakers reproduce bass frequencies
effectively, or if you didn't connect a
subwoofer. Select SMALL to send the bass
frequencies to the subwoofer.
1