Johnson 40-6557 Mode D'emploi page 17

8489H-All_Manuals 11/18/14 11:50 AM Page 17
When the laser is vertical, adjust the vertical
reference beam over the vertical support
bracket by adjusting the vertical leveling
knobs to center the bubble vial.
Remote Keypad
Notes:
1. The rotating speed button, scan button and scan clockwise/
counterclockwise button on the remote control are the same as
the buttons on the laser.
2. When the laser is in the Man/Slope mode, press the slope adjust-
ment button on the remote control to adjust the inclined angle of
laser plane (or laser line).
©2015 Johnson Level & Tool
All manuals and user guides at all-guides.com
1. Scan Function Mode Button
2. Slope Axis Direction Selection Button
3. Rotating Speed Button
4. TILT Reset Button
5. Self-Calibration Axis Selection Button
6. Self-Calibration Adjustment Button
7. Self-Calibration Confirmation Button
8. Sleep Mode Button
9. Slope Adjustment Buttons
10. Scan Clockwise/Counterclockwise Buttons
Adjust the vertical
leveling knob to center
the bubble vial.
17