Johnson 40-6557 Mode D'emploi page 12

8489H-All_Manuals 11/18/14 11:50 AM Page 12
Slope Axis-Direction LED
For X, Y, Z LED's, when one axis is in slope setting status, its corre-
sponding LED will be on
Vibrate/V-W-S LED
LED On = vibrate mode is on
LED Off = vibrate mode is off
Power On/Off
1. Press the power button to power on. The power indicator
LED will light up and the laser will automatically level
itself, with rotation occurring once the unit is level.
2. Press the power button again to power off.
3. Pressing the red power button on the remote will power down the
laser beam and rotating beacon, but does not power off the laser.
The power indicator LED will flash twice.
Low Battery Indicator
If the power LED is blinking, it means the battery is low. To ensure
operation, replace batteries or charge the rechargeable battery pack.
Alarm If Beyond Range
If the laser is inclined beyond its auto-leveling range of ±5°, it will deliver an
audible alarm, rotation will stop and the laser beam will flash. You will
need to re-position the laser within its self-leveling range.
12
All manuals and user guides at all-guides.com
©2015 Johnson Level & Tool