8489H-All_Manuals 11/18/14 11:50 AM Page 16
Timed Auto-off Function
Turn the unit on using the power button on the instrument keypad.
Press the power button once on the remote control. The unit is now
in sleep mode. The rotating beacon and laser beam will be
powered down.
If the unit is in sleep mode for 30 continuous minutes, the unit turns off
automatically. With a second press of the power button on remote control,
the unit exits sleep mode and enters self-level mode.
Remote Control Shield Button
The remote control function is on when the laser is turned on
and the remote control LED is off. Press this button on the
laser keypad and the remote control LED goes on. The laser
does not receive a remote control signal.
Using the Laser in the Vertical Mode
Set the laser on a flat surface with the keypad
facing up. Flip the folding vertical support
bracket to the up position. The rotating laser
beam will rotate directly over the cross line
on the vertical bracket, which is positioned
directly above the metal foot.
Install the laser on a tripod using the 5/8"
vertical thread hole on the side of the laser.
The folding support bracket does not need to
be flipped to the up position.
16
All manuals and user guides at all-guides.com
Place on Flat Surface
Place on Tripod
©2015 Johnson Level & Tool