Johnson 40-6557 Mode D'emploi page 15

8489H-All_Manuals 11/18/14 11:50 AM Page 15
- Press the button
direction for X or Y direction. Then press
control to adjust the slope value. When the X LED is lit, the
X-axis is in slope mode and the Y-axis is in auto-leveling. When
the Y LED is lit, the Y-axis is in slope mode and the X-axis is
auto-leveling.
2. Press the Man/Slope mode button again to select manual/dual slope
mode. The Man LED will turn on.
- Press the button
direction for X or Y direction. Then press
control to adjust the slope value. When the X LED is lit, the
X-axis is in slope mode and the Y-axis is inactive. When the Y
LED is lit, the Y-axis is in slope mode and the X-axis is inactive.
3. Another press of the Man/Slope mode button exits the slope mode.
Note: When laser is in slope mode, Vibrate and TILT mode can be
active. When laser is in manual mode, Vibrate and TILT mode is
turned off.
4. In vertical mode - using single-axis slope allows the operator to
move the vertical laser line 5º to the left and right.
Reset TILT Mode
Press this button on the laser or remote control when the laser has
been moved in TILT mode to return to self-leveling TILT mode.
©2015 Johnson Level & Tool
All manuals and user guides at all-guides.com
on the remote control to choose the slope
on the remote control to choose the slope
on the remote
on the remote
15