8489H-All_Manuals 11/18/14 11:50 AM Page 10
Note: If the laser is inclined beyond the self-leveling range, the
laser will deliver an audible alarm. You will need to re-position the
laser inside of its self-leveling range.
3. Press power button on the laser to turn the laser power on, and
press operation buttons on control panel or use remote control to
adjust to your desired working status. (Note: Remote will not
power unit on.)
4. After finishing operation or before moving the laser, turn the
power off.
7. Using the Product
Place the unit on a relatively level surface like a tripod, floor, etc
during operation.
Operating Panels
1. Scan/DOT Clockwise Button
2. Vibrate/V-W-S Button
3. Vibrate/V-W-S Button LED
4. Scan Button
10
All manuals and user guides at all-guides.com
5. TILT Mode LED
6. TILT Mode Button
7. Scan/DOT Counterclockwise Button
8. Slope Axis-Direction LED's
9. Remote On/Off LED
10. Remote On/Off Button
11. Reset TILT Mode Button
12. Power LED
13. Power On/Off Button
14. Rotating Speed Button
15. Slope Mode LED
16. Manual/Slope Button
17. Manual Mode LED
©2015 Johnson Level & Tool