Exit Bounzy Trampoline Mode D'emploi page 20

STEP 11
Run the big head and small head of
adjacent rails (2) out of the net holes as
shown. Then insert the big head into the
plastic beam (8), then insert the small
as shown. Then insert the big head into
as shown. Then insert the big head into
head into big head as shown.
Repeat this step to assemble the rest rails.
STEP 12
Insert the pole cap (13) through one strap
ring on the top of the net as shown.
Make sure that all parts are securely
attached. Familiarize yourself and all users
with the trampoline and enclosure, with the
safety precautions, use and instructional
materials, and the care and maintenance
instructions in this manual before using the
trampoline and enclosure.
Congratulations! Your trampoline is now fully assembled.
20
11
11
1
big
1
small
big
small
groß
klein
groß
klein groot
klein
groot
klein grande
petite
grande
petite
2 holes between adjacent 2 sleeves
2 holes between adjacent 2 sleeves
2 Löcher zwischen 2 angrenzenden Hülsen
2 Löcher zwischen 2 angrenzenden Hülsen
2 openingen tussen 2 hoezen.
2 openingen tussen 2 hoezen.
2 trous entre 2 housses attenantes
2 trous entre 2 housses attenantes
3
3
big
big
groß
groß
groot
groot
grande
grande
12
12
2
2
big
big
groß
groß
groot
groot
grande
grande
4
4
13
13