Télécharger Imprimer la page

Trevi XF 1560 KB Mode D'emploi Et Branchement page 16

Haut-parleur portable amplifie

Publicité

Les langues disponibles
  • FR

Les langues disponibles

ENGLISH
requirements, contact the competent authorities. The user assumes exclusive responsibility for the acquisition of the license
for radio-microphones and licensability depends on the classification and application of the user and on the frequency selected.
(Legislative Decree 269/2001 art.6 paragraph 3). The frequencies used by this product are authorized only on Italian territory
and may not be usable in other countries. It is recommended to contact the competent authorities and request the relevant
information.
European countries for which the product has restrictions:
United Kingdom: IMPLEMENTED.
Spain: LIMITED IMPLEMENTATION.
France: LIMITED IMPLEMENTATION, for professional users.
Denmark: LIMITED IMPLEMENTATION, tuning range.
Malta: LIMITED IMPLEMENTATION, individual license required.
UK
ES
FR
Ireland: NOT IMPLEMENTED
DK
MT
IE
REC FUNCTION OPERATION
Recording from Microphone to USB flash drive
1. Switch on the appliance;
2. Insert a USB memory into the socket (16);
3. Switch On the microphone;
4. Press the REC (5) button on the unit and speak using the microphone;
5. Press again the REC (5) button to end recording; the recorded file will be saved in the USB memory.
TROUBLESHOOTING
If a problem occurs, follow the steps in the table below.
If the problem still can't be solved, please contact your retailer.
Problem
No sound when power is
turned ON
Distorted sound
No sound from the mi-
crophone
No sound comes after
inser ting USB/ Micro
SD Card
Unable to charge or the
battery works only for
short duration
Possible cause
1. No input sound source comes
2. Volume knob in the lowest position
3. Voice switch off
4. USB/Micro SD card not plugged
1. Volume is too loud
2. Audio file error
1. Microphone socket may not be
plugged properly.
2. Microphone switch may not be on.
3. Microphone volume is on lowest
mode.
1. Incorrect file format
2. USB/Micro SD may not be plugged
properly
1. Connect with power cord to charge
2. Battery not fully charged
3. Battery life may have ended
1. Input AUX signal
2. Adjust volume
3. Turn on voice switch
4. Plug USB/Micro SD card, play MP3
1. Turn the volume down
2. Check and change the audio file
1. Ensure the microphone is correctly plugged
into the socket.
2. Turn on the microphone
3. Adjust the microphone volume as per users
wish
1. File format should be MP3
2. Plug USB/Micro SD card correctly
1. Check if power cord connected properly
2. Extend charging time;normally it takes 6-8 hour
to fully charge
3. Replace old batteries with the same specifica-
tion as the old batteries.
16
XF 1560 KB
Solution

Publicité

loading