Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
BASIC FUNCTIONS
POWER ON/ OFF
Press the main POWER switch (25) to switch on and use the device with its internal battery.
Press the main POWER switch (25) again to switch off the device completely or to recharge the battery.
STAND-BY
It is possible to bring the appliance into Stand-by mode using the button
Caution:
-
In Stand-by mode, the blue LED lighting of the knobs remains On to indicate the activation of the Stand-by function.
-
Leaving the device in Stand-by, the battery tends to discharge faster than using the main POWER switch (25).
MODE
FUNCTION
To change the mode function, press more times the MODE
to select: BLUETOOTH (on display "BLUE"), USB/Micro SD (only if the socket USB (16)/Micro SD socket (17) is connected to a
memory, a small writing "USB" or "SD" appears on the display), AUX-IN (on display "AUX").
ADJUSTING THE VOLUME
1. Turn the VOLUME knob (12) to increase or decrease the general playback volume or use the Vol+ (10) and Vol- (13) buttons
on the remote control;
2. Turn the MIC. VOL knob (3) to adjust the volume of the signal at the MIC1
EQUALIZER
This unit has a built-in audio equalizer system. Adjust the frequencies of the 5-band equalizer (2) to set the sound and adapt it to
the sound reproduction in progress. In addition, the unit has a pre-set audio equalization system. Press the EQ button (3) on the
remote control several times and select one of the 6 audio equalizations available.
SETTING TREBLE AND BASS TONE (MICROPHONE)
Turn the M. TREBLE knob (19) to adjust the high tones.
Turn the M. BASS knob (18) to adjust the bass tones.
ECHO EFFECT (MICROPHONE AND GUIT.)
Turn the ECHO knob (20) to increase or decrease the echo effect on the input MIC/ GUIT.
DELAY EFFECT (MICROPHONE AND GUIT.)
Turn the DELAY knob (21) to increase or decrease the delay effect on the input MIC/ GUIT.
DISCO-LIGHT EFFECTS
Press the LED switch (23) to activate the Disco-Light effect on the speaker.
Press again the LED switch (23) to deactivate the Disco-Light effect.
BLUETOOTH FUNCTION
1. Switch on the appliance and select the bluetooth function, the word "BLUE" appears on the display;
2. In Bluetooth mode the word "BLUE" on the display will flash and the system will automatically go into search mode;
3. Activate the Bluetooth feature on the external device to be coupled;
4. Initiate a search for devices. After select the "XF 1560 KB";
5. Enter the password "0000" if required;
6. Press the
(10) button on the unit or the key (11) on remote control, to start playing and the buttons
on the
unit, or the keys
TWS FUNCTION OPERATION
True wireless stereo (TWS) technology
TWS technology enables user to make wireless connection between two speakers which are same model and compatible with
TWS. In TWS connection, two speakers will be automatically grouped to be a Stereo- Speaker System which outputs the left and
right channel.
:
9
(12) and
(4) for selection of songs.
(
6)
on the remote;
(4)
key on the unit or press MODE button (15) on the remote control
(13) and MIC2 (14)
14
XF 1560 KB
input.
:
9
(11) o
(9)
Publicité
