Publicité
Les langues disponibles
Les langues disponibles
3.5 - INSTALLATION AND ADJUSTMENT OF
THE MOTOR LIMIT SWITCHES
1.
Release the gear motor
2.
Remove the 2 screws underneath the motor and remove the
cover
3.
Unscrew the screw in the motor arm and remove it
4.
Fix the limit switches on the motor arm; these must also be
installed in the presence of mechanical stops on the ground
Opening
5. At this point re-install the arm onto the motor
6.
Manually verify that, when opening and closing, the gate leaf
stops at the desired points
- 42 -
Closing
Closing
Opening
Publicité
