Haier 6 Serie Instructions D'installation page 9

1
INSTALLATION
TECHNICAL INFORMATION FOR THE INSTALLER
In order to install the cooker top into the kitchen fixture, a hole with the dimensions shown
in fig. 1.1a has to be made, bearing in mind the following:
• A 40 mm ventilation gap must be provided between the bottom of the appliance and
any cabinetry, draw unit, thermal protection barrier.
• If the base of the cooktop is accessible through a cupboard or drawer space after
installation, a thermal protection barrier must be installed below the base of the
cooktop as indicated in fig. 1.1c.
• The cooker top must be kept no less than 200 mm away from any side wall (from side
edge of cutout - figs. 1.1a, 1.1b).
• The hob must be installed at least 60 mm from the wall (from rear edge of cutout - fig.
1.1a).
• There must be a distance of at least 650 mm between the hob and any wall cupboard
or extractor hood positioned immediately above (see fig. 1.1b).
9 9