Haier 6 Serie Instructions D'installation page 17

REPLACEMENT OF THE INJECTORS
If the injectors are not supplied they can
be obtained from the "Service Centre".
Select the injectors to be replaced according
to the "TABLE FOR THE CHOICE OF THE
INJECTORS".
The nozzle diameters,
hundredths of a millimeter, are marked on
the body of each injector.
REPLACEMENT
INJECTORS OF THE COOKTOP
BURNERS
To replace the injectors proceed as follows:
• Remove pan supports and burners
from the cooktop.
• Using a wrench,
injectors "J" (figs. 2.2a, 2.2b, 2.2c) with
those most suitable for the kind of gas
for which it is to be used.
The burners are conceived in such a
way so as not to require the regulation
of the primary air.
expressed in
OF THE
substitute the
Auxiliary,
semi-rapid
and rapid
burner
Double-ring burner
J
Dual burner
Injector for
inner crown
J
J
Fig. 2.2a
Fig. 2.2b
Injectors
for outer
J
crown
Fig. 2.2c
17 17