Haier 6 Serie Instructions D'installation page 14

CONNECTING THE COOKTOP TO THE GAS SUPPLY
The gas connection fitting (fig. 2.1) is made up of:
• the floating nut;
• the elbow;
• the gaskets;
The gas connection must be carried out by an authorised person according to the
relevant local standards.
• If using a flexible hose, make sure it does not come into contact with moving parts.
• The rear of the chassis is recessed to provide a channel for the appliance inlet pipe.
• The gas connection fitting can be turned in the direction required (but never in a vertical
or horizontal position) after loosening the elbow and floating nut connection.
• Never attempt to turn the elbow without having first loosened the floating nut.
• The supplied gaskets guarantee a good seal for the gas connection. We recommend
that you replace the gaskets on the slightest sign of wear, deformation or imperfection.
• After connecting to the gas mains, check that the couplings are correctly sealed, using
soapy solution, but never a naked
14 14
flame.
ISO 228-1 (male) 1/2"
cylindrical
Elbow
Gasket
Gasket
Floating nut
ISO 228-1 (male) 1/2"
cylindrical
Appliance inlet pipe
Rigid pipe or flexible
hose
Fig. 2.1