Haier 6 Serie Instructions D'installation page 32

PAN SUPPORTS
These parts can be removed and cleaned with appropriate products.
After cleaning, they must be well dried and correctly replaced.
Warning! Not dishwasher safe.
It is very important to check that the pan supports have been correctly positioned. Failure
to do so can cause serious problems.
The prongs of the pan supports must always be centred with the burners (fig. 3.7).
Note: Continuous use may cause a change in the glaze around the burners and
grids, corresponding to the areas exposed to the heat. This is a natural phenomenon
and does not prevent the parts from working properly.
32 32
Fig. 3.7