3. ENCODING PANELS*
Whenever there is more than one panel, you must program the number of panels.
4. CAMERA FOCUS / LOCK RELEASE ACTIVATION TIME*
To adjust the camera image or adjsut the lock-release activation time.
* See Voice assisted confi guration in button panels cod. 970048. Instructions included with this
equipment.
TECHNICAL FEATURES
PANEL TECHNICAL CHARACTERISTICS
Power Supply
Standby Consumption
Audio active consumption
Audio Power in Residence - Entry Panel Direction
Audio Power in Entry Panel - Residence Direction
Operating temperature
Volume can be Regulated in Both Directions.
PANEL VALUES
Lock-release activation time
Exit button activation time
Panel type
Panel number
- MASTER panel: not active.
MONITOR TECHNICAL CHARACTERISTICS(OSD TFT 4,3" Screen)
Power supply
Standby consumption
Audio + video consumption
Operating temperature
FLOOR
SECTIONS-DISTANCES TABLE
Distance section table - VIDEO KIT INSTALLATION WITH FILTER (1 AND 2 LINES)
SECTION
CABLE
TERMINALS
per home
without additional
power source
- (i) For the 12Vdc lock-release and max. consumption 250mA, powered by the amplifi er.
4
DUOX VIDEO CITYLINE 1-2 L KIT
01...99 sec. (Default: 03)
00...99 sec. (Default: 06) / (deactivated: 00)
sub-block/block/general entrance. (Default: block)
0..9 (by default: 00)
18 Vdc
25 mA
230 mA
[-5º , +40ºC] / [23º, 104ºF]
Maximum distance (A)
Source/Filter up to Panel
(Panel-Lock release) (i)
18 Vdc
165mA
275 / 480(max) mA
1 W
0.15 W
[-25º , +55ºC] / [-13º, 131ºF]
Maximum distance (A)
Source/Filter up to Panel
(WITHOUT lock release)
Maximum distance (B)
Source/Filter up to
Panel
Furthest terminal