Getting Started; Detaching The Front Panel; Attaching The Front Panel - Sony MEX-N5100BT Mode D'emploi

Bluetooth audio system
Masquer les pouces Voir aussi pour MEX-N5100BT:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

ALBUM /
Skip an album for audio device. Press and hold
to skip albums continuously.
(repeat)
(shuffle)
MIC (page 14)
PAUSE
 MEGA BASS
Press to turn on/off the MEGA BASS function.
 AF (alternative frequencies)/TA (traffic
announcement)
Set AF and TA.
PTY (program type)
Press and hold to select PTY in RDS.
 AUX input jack
 DSPL (display)
Press to change display items.
SCRL (scroll)
Press and hold to scroll a display item.
 USB port
 RESET (inner panel) (page 7)
 Microphone (inner panel) (MEX-N4100BT only)
In order for the handsfree function to work
properly, do not cover the microphone with
tape, etc.
6
GB

Getting Started

Detaching the Front Panel

You can detach the front panel of this unit to
prevent theft.
1
Press and hold OFF  until the unit turns
off, press the front panel release button
, then pull the panel towards you to
remove.
Caution alarm
If you turn the ignition switch to the OFF position
without detaching the front panel, the caution
alarm will sound for a few seconds. The alarm will
only sound if the built-in amplifier is used.
Serial numbers
Make sure the serial numbers on the bottom of the
unit and the back of the front panel are matched
correctly. Otherwise you cannot make BLUETOOTH
pairing, connection and disconnection by NFC.

Attaching the front panel

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Mex-n4100btFmMwLw

Table des Matières