Publicité
Les langues disponibles
Les langues disponibles
Original User Manual Generator FX-SG Series
Maintenance measures
Engine oil change
NOTE
Drain the engine oil when the engine is still
warm after shutdown. At
this way, quick and complete draining of
the engine oil is ensured.
◼ Screw oil filler cap (yellow) with dipstick
out of oil filler neck.
◼ Position suitable drain container under
the oil drain of the crankcase.
◼ Unscrew drain plug (X) and drain
crankcase completely.
◼ Screw the drain plug firmly back into
the crankcase.
◼ Fill with engine oil of the specified
quality up to the upper mark on the
dipstick.
◼ Screw the oil filler cap with dipstick
firmly back into the oil filler neck.
Check spark plug
Remove spark plug cap (Y)
◼ Unscrew the spark plug
counterclockwise with the socket
wrench.
All manuals and user guides at all-guides.com
◼ Remove soot deposits from spark plug
electrodes with a wire brush.
◼ Check electrode gap (X) with gauge,
adjust to 0.7 to 0.8 mm if necessary.
◼ Screw spark plug with gasket tightly
into engine housing.
Reassemble components in reverse
order.
NOTE!
A suitable spark plug wrench is included in
the scope of delivery.
Cleaning the oil filter cup
NOTE!
The oil filter cup prevents dirt or water
components from entering the carburettor.
◼ Close fuel shut-off valve in "OFF"
position.
37
Publicité
