Publicité
Les langues disponibles
Les langues disponibles
Original User Manual Generator FX-SG Series
Choke
NOTE
Do not use the choke when the engine is
warm.
◼ Set choke to "RUN" position.
On/Off switch
◼ Switch on/off switch to "I" - ON position.
Starter handle (manual)
◼ Pull out the yellow starter handle slowly
until resistance is felt. Then pull
forcefully.
CAUTION!
After a successful start, do not allow the
pull rope to snap back. That risks injury and
damage to components on the generator.
Guide handle back slowly!
All manuals and user guides at all-guides.com
Key switch electric start
An electric starter is only
available on the FX-SG7500B
model.
◼ Turn the key switch from the "ON"
position to the "START" position.
◼ After starting, turn the key switch
back to the "ON" position.
After start
After starting the engine (or when the
engine is already warm), turn the choke to
the "START" position.
Commissioning
Before commissioning, the generator must
be grounded.
◼ Connect the ground terminal of the
generator to a metal frame or other
suitable conductive metal structures.
◼ Before commissioning, measure the
protective grounding to detect and, if
necessary, rectify faults in the protective
grounding.
CAUTION!
Observe:
Inductive loads, such as electric motors,
require a high starting current!
These include, e.g., fans, drilling machines,
pumps (4-fold), wood splitters (4-fold),
compressors, circular motors, etc.
35
Publicité
