Publicité
Les langues disponibles
Les langues disponibles
− Damage
to
the
prescribed hearing protection is worn
during continuous operation,
− Inhalation of exhaust gases from
the combustion engine,
− skin contact with gasoline.
Additional safety instructions
◼ Switch off the generator under the
following conditions:
− Before filling up with fuel (let
components cool down first),
− if it is left unattended for a more
extended period,
− before checking, cleaning, or
otherwise working on the generator,
− if the Genset starts to vibrate
excessively.
◼ During operation, ensure that no
persons (especially children) or
animals are in the operating area.
◼ Only use the generator set under
dry conditions. Keep the unit away
from rain and moisture.
◼ Do not leave the generator
unattended during longer breaks in
operation, and park the generator
after the process in a secure location
that is not accessible to
unauthorized persons.
◼ Always switch off the generator when
transporting it to other operating
locations.
◼ Make sure that all protective devices
are mounted when using the
generator.
◼ Never operate an incompletely
assembled generator or a generator
with unauthorized modifications.
◼ Only operate the generator in the
technical condition specified and
supplied by the manufacturer.
26
All manuals and user guides at all-guides.com
Original User Manual Generator FX-SG Series
hearing,
if
Unauthorized modifications to the
no
generator exclude the manufacturer's
liability for any resulting damage.
◼ Only use original spare parts or spare
parts approved by the manufacturer.
Observe the installation instructions
supplied with the replacement parts.
◼ Only have repairs carried out by a
qualified and authorized specialist or
a specialist workshop.
◼ Take the following measures before
commissioning:
− Carry out a visual inspection for
damage.
− Check the generator for loose parts
and, if necessary, remedy the
situation by reassembling the pieces
correctly.
− Have damaged parts replaced or
repaired. Make sure that the
replacement parts are of the correct
specification.
◼ Before operating the generator,
familiarize yourself thoroughly with
its operation and, if necessary,
have a specialist instruct you.
Noise and vibration
NOTE
Refer to the "Technical data" table for the
A-weighted noise level and the total
vibration values.
CAUTION!
The measured values given apply to new
devices. Noise and vibration values
change during daily use.
NOTE
The vibration level specified in these
instructions has been measured in
accordance with a standardized
measuring method in EN 60745.
If
the
power
maintained, the vibration level may deviate
during operation.
supply
is insufficiently
Publicité
