Publicité
Les langues disponibles
Les langues disponibles
ture.
The LED display indicates the current system temperature.
The yellow LED indicates the switching state of the transistor output.
The green LESs indicate the set display unit (°C or °F).
Display mode:
Indication of parameters and the set parameter values
When the "Mode/Enter" button is pressed briefly, the unit passes to
the Display mode which allows parameter values to be read. The inter-
nal sensing, processing and output functions of the unit continue as if
in Run mode.
• The parameter names are scrolled with each pressing of the
"Mode/Enter" button.
• When the "Set" button is pressed briefly, the corresponding para-
meter value is displayed for 15 s. After another 15 s the unit returns
to the Run mode.
Programming mode:
Setting of the parameter values
While viewing a parameter value pressing the "Set" button for more
than 5 s causes the unit to enter the programming mode.You can alter
the parameter value by pressing the "Set" button and confirm the
new value by pressing the "Mode/Enter" button. The internal sensing,
processing and output functions of the unit continue as if in Run
mode with the original parameter values unless a new value is con-
firmed.
The unit returns to the Run mode when no button has been pressed
for 15 s.
Installation
Connect a temperature sensor to the unit and fix it to the process
connection.
20
All manuals and user guides at all-guides.com
Publicité
