Miele PDR 910 EL Schéma D'installation page 28

en - Installation notes
Communication
box
Payment systems
28
einträchtigt werden!
Floor anchoring
Miele generally recommends securing both of the tumble dryer's
front screw feet to the floor with tensioning strips.
In the following cases, the tumble dryer must be secured to the floor
with tensioning strips:
- When installing on a plinth
- On an offshore installation
Optional accessories
Only use genuine Miele spare parts and accessories with this ma-
chine.
Using spare parts or accessories from other manufacturers will in-
validate the warranty, and Miele cannot accept liability.
The optional communication box allows external hardware from Miele
and other suppliers to be connected to the Miele Professional ma-
chine. External hardware includes, e.g. payment system, peak-load
system, pressure sensor or an external vent flap.
The communication box is supplied with mains voltage by the Miele
Professional machine.
The separately available set consists of the communication box and
fasteners for installation on the machine or on the wall.
This tumble dryer can be fitted with a payment system (optional Miele
accessory). In this case, a Miele Customer Service technician must
programme the relevant settings in the tumble dryer's electronics and
connect the payment system.
47