Installation And Connection - EUROM Orsa Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 34
see smoke, or if it has fallen or shows any other signs of damage. Remove the plug
from the socket immediately. Take the entire device back to your supplier or a
recognised electrician to be checked and/or repaired. Always ask for original parts to
be used.
4.
The device may only be opened and/or repaired by a competent and qualified
person. Do not carry our your own repairs as this could be dangerous! Repairs carried
out by unauthorised persons or changes made to the device could damage the
dust/waterproof capacity of the device and will nullify the guarantee and the
manufacturer's liability.
5.
If the electrical cable is damaged, it must be replaced by the manufacturer, their
service department or somebody with similar qualifications in order to prevent
creating a hazard.
Failing to adhere to points 3, 4, 5, could lead to damage, fire and/or personal injury. They
will invalidate the guarantee and the supplier, importer and/or manufacturer shall not be
liable for the consequences.
Description
1. Suction grille, switches and thermostat button
(rear)
2. Handle
3. Flame screen
4. Air outlet grille
5. Wood compartment (wood not included)

Installation and connection

 Remove the packaging materials and keep out of the reach of children. After removing
packaging, check device for damage or any evidence that may point to a defect/failure.
If in doubt, do not use the device but refer to your supplier for checks/repairs.
 Select a suitable location for the device taking into account all the aforementioned
warnings in this manual.
29

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

363487363494

Table des Matières