Problems And Solutions - EUROM Orsa Manuel D'utilisation

Problems and solutions

If the fireplace will not work check the electrical supply. Is the socket working properly?
Has the fuse blown?
The light is burning on the heater, but the heater does not provide heat? Check if the
thermostat on the heater is higher than the current room temperature.
If the fireplace stops working suddenly, it may mean that the overheating safeguard has
been triggered (see under 'Safeguards').
If the atmospheric lighting is not working or does not work properly, one or more of the
bulbs may need to be replaced (see 'Replacing a bulb').
In the event of other defects, immediately switch the fireplace off, remove the plug from
the socket and consult a supplier or recognised electrician. Never carry out repairs
yourself as this invalidates the guarantee and may be dangerous!
Disposal
At its end of life, discard the device according to the local laws and regulations, or deliver
the device to your supplier.
Attachments
The CE declaration can be found at the end of this manual.
33