RIDGID 690 Manuel De L'opérateur page 10

No. 690 Portable Power Drive
Accessories
WARNING Only the following RIDGID products have
been designed to function with the 690 Power Drive.
Other accessories suitable for use with other tools may
become hazardous when used on this Power Drive. To
prevent serious injury, use only the accessories listed
below.
Accessories For Power Drive
Catalog No. Description
10883 418 Oiler with 1 Gallon of NU-Clear Thread Cutting Oil
43292 691 Support Arm
41620 Gearhead Motor Grease
39187 Adapter for 11-R
72037 460 Tristand Chain Vise
16703 425 Tristand Chain Vise
NOTE! See Ridge Tool catalog for listing of 11-R Die
Heads, Pipe Supports, Vises and Thread Cutting
Oil. No. 11-R Die Heads use 12-R Dies.
Tool Storage
WARNING Motor-driven equipment must be kept
indoors or well covered in rainy weather. Store the Power
Drive in a locked area that is out of reach of children
and people unfamiliar with power drives. This power tool
can cause serious injury in the hands of untrained users.
8
All manuals and user guides at all-guides.com
1 / - 6" Capacity
8
1 / - 2 1 / " Capacity
8 2
Ridge Tool Company
Service and Repair
WARNING
Service and repair work on this Power Drive must be
performed by qualified repair personnel. Tool should be
taken to a RIDGID Independent Authorized Service
Center or returned to the factory. All repairs made by
Ridge service facilities are warranted against defects in
material and workmanship.
When servicing this Power Drive, only
WARNING
identical replacement parts should be used. Failure to fol-
low these steps may create a risk of electrical shock or
other serious injury.
If you have any questions regarding the service or repair
of this machine, call or write to:
Ridge Tool Company
Technical Service Department
400 Clark Street
Elyria, Ohio 44035-6001
Tel: (800) 519-3456
E-mail: TechServices@ridgid.com
For name and address of your nearest Independent
Authorized Service Center, contact the Ridge Tool Com-
pany at (800) 519-3456 or http://www.RIDGID.com