UFESA AP5150 Mode D'emploi page 19

MAINTENANCE
1. Cleaning and replacing the motor filter
• We recommend cleaning the filter after every extended vacuum cleaning session. The filter is located
on the vacuum cleaner. To access it, remove the dust bin.
• Regular filter cleaning and maintenance will allow good vacuum cleaning results, and thereby longer
appliance useful life. In this respect, we recommend the following cleaning method:
- cleaning with a brush,
- beating the filter or shaking off the dirt from it,
- blowing the filter with compressed air.
• A clean filter will allow unobstructed airflow and optimum suction power.
2. Replacing the exhaust filter
The exhaust filter is located behind the grille seen at the back of the vacuum cleaner.
- Open the grille and remove the filter from the vacuum cleaner.
- Clean the filter in a similar way as described in the preceding section. Do not forget the foam
filter on the grille.
- When the filter is clean, place it back into the vacuum cleaner and replace the grille.