brondell Swash LES512 Manuel Du Propriétaire page 20

OPERATING THE SWASH
Special Mode Operations
Activating / Deactivating Silent Mode
1. To activate Silent Mode, press and hold
the
" – " Water Pressure/Dry Temp button
for four seconds. A beep will sound
to indicate that Silent Mode has been
activated.
2. To deactivate Silent Mode, press and
hold the " – " Water Pressure/Dry Temp
button for four seconds. Two beeps will
sound to indicate that Silent Mode has
been deactivated.
Activating / Deactivating Nightlight
The Nightlight is activated at the factory
by default.
1. To deactivate the Nightlight, press and
hold "+" for four seconds. This function
cannot be performed while sitting on the
seat.
18
2. To activate the Nightlight, press and hold
"+" for four seconds. This function cannot
be performed while sitting on the seat.
Sleep Mode
In Sleep Mode, the Swash essentially
powers down. The Nightlight and the side
arm lights, the seat heater and the water
heater will turn off.
1. To activate Sleep Mode, press and hold
the Stop button for four seconds. The
unit will power down.
2. To awaken the Swash from Sleep Mode,
press the Stop, Front, or Strong button.
Factory Default Reset
It is possible to reset the Swash to Factory
Default settings.
To reset the Factory Default settings, press
and hold the Stop button for ten seconds. A
beep will sound at two seconds indicating
the beginning of the reset process and
another beep will sound at four seconds
indicating the reset is activated.
Automatic Tank Draining
1. To prevent stagnation, water in the warm
water storage tank can be set to drain and
refill itself if the seat hasn't been used in 48
hours.
2. To program this feature, press "Stop" and
"Water Temp." at the same time and hold
buttons for four seconds.