Télécharger Imprimer la page

brondell Swash LES512 Manuel Du Propriétaire page 13

Publicité

Les langues disponibles

Les langues disponibles

PRODUCT INSTALLATION
Swash Installation
Please read these instructions carefully before installing the Swash. Failure
to do so could result in flooding, leaking or damage to the product.
NOTE: Steps may vary by type of seat and toilet
1. Existing Toilet Seat Removal
a. Lift hinge covers and use a screwdriver to remove the mounting
bolts.
b. Remove the toilet seat. Keep for future use.
2. Turn Off Water Supply Valve and Flush Toilet
a. Turn water valve off to stop the flow of water.
b. Flush toilet and hold down handle to completely
empty tank.
c. Disconnect water supply hose from toilet tank. Do not
disconnect from the water supply valve.
NOTES
• You may wish to place a container under the tank to catch excess water.
• Do not continue without completing the above steps.
• Failure to do so could result in flooding, leaking or damage to the Swash.
3. Connect the top of the T-valve to the incoming water connection
on the bottom of your toilet tank.
a. Ensure the rubber washer is placed inside the T-valve against
the metal with the raised lip facing the toilet tank connection.
b. Install the T-valve with the rubber washer to the incoming water
connection on the bottom of the toilet tank.
NOTES
• The T-valve connects to the fill valve directly under your toilet tank -
it does not connect at the wall.
• Only connect to the cold toilet water supply line.
• If your water supply line is rigid you may need to replace the water
supply line before continuing.
4. Connect the water supply line coming from the wall to the bottom
of the T-valve.
5. Install Mounting Plate for Standard Installation
a. Place mounting plate over mounting holes on toilet, rubber side
facing down, arrow pointing to the toilet tank.
b. Place adjustable brackets flat side down in the center of the
square opening in the mounting plate and insert mounting bolts
through adjustable brackets and mounting holes. Be sure that
the square mounting bolt head is even with sides of adjustable
bracket.
Step 2c
Toilet tank
T-valve
Cold
water
supply
line
Steps 3-4
Steps 5b-5c
11

Publicité

loading