Publicité
Les langues disponibles
Les langues disponibles
PRODUCT INSTALLATION
External Bidet Filter Installation
NOTE: Customers with hard water, well water, and softened water can
extend the life of their bidet seat by purchasing and installing an external
inline water filter to be used with the Swash. The bidet filter should be
changed every six months, and can be purchased online at brondell.com.
1. Turn Off Water Supply Valve and Flush Toilet.
a. Turn water valve off to stop the flow of water.
b. Flush toilet and hold down handle to completely empty tank.
2. Disconnect the Bidet Hose from the T-valve.
3. Connect the female end of the Swash Filter to the open T-valve connection.
4. Connect the Bidet Hose to the male end of the Swash Filter.
5. Turn the toilet water supply valve back on.
Step 2
FLOW
Step 3
FLOW
Step 4
13
Publicité
