brondell Swash LES512 Manuel Du Propriétaire page 17

OPERATING THE SWASH
LES512 Control Panel
1. Stop Button
Stops all wash and dry functions
currently operating.
2. Rear Wash / Move Button
Press once to initiate a rear wash.
Press again to initiate nozzle oscillation
(repetitive forward and backward nozzle
movement).
3. Front Wash / Move Button
Press once to initiate a front wash.
Press again to initiate nozzle oscillation
(repetitive forward and backward nozzle
movement).
4. Strong Wash / Move Button
Press once to initiate a strong wash.
Press again to initiate nozzle oscillation
(repetitive forward and backward nozzle
movement).
5. Dry Button
Press once to initiate a two-minute Warm
Air Dryer cycle.
6. Pulse Button
Pressing this button while a wash is
running enables the water to repeatedly
increase and decrease in pressure in a
pulsating pattern.
7. Nozzle Position Buttons
Press the up and down arrow buttons to
adjust the nozzle position forward and
backward during a wash cycle.
8. Seat Temperature Button and Indicators
Press and release the Seat Temp button
to adjust the seat temperature to one of
four settings (Low: 93.2°F, Medium:
100.4°F,
High: 107.6°F, and Off). Settings will be
saved for the next use.
9. Nozzle Cleaning Button
Press this button to initiate Nozzle
Cleaning when not sitting on the seat, or
while seat sensor is deactivated. For more
nozzle maintenance see page 20.
10. Eco Mode Button and Indicator
Press and release the Eco Mode button
to select between two energy-saving
options (Standard, High-Efficiency). See
page 17 for more information.
11. Water Temperature Button and
Indicators
Press and release the Water Temp
button to adjust the outgoing water
temperature to one of four settings (Low:
91.4°F,
Medium: 96.8°F, High: 102.2°F, and Off).
Settings will be saved for the next use.
12. Water Pressure and
Dry Temperature Controls
Press the "+" and "–" buttons to increase
and decrease the outgoing water
pressure to one of five settings. Pressing
these buttons while the Warm Air Dryer
is operating will adjust the drying
temperature. For Front Wash, Rear
Wash and Dry, settings will be saved for
next use. For Strong Wash, the highest
pressure settings will default for all uses.
13. Gentle Mode Button
Press this button to initiate a two-minute
gentle wash cycle followed by a two-
minute dry cycle. See page 16 for more
information.
15