Kenmore W10300754A Instructions D'installation page 8

Option A, Power Supply Cord: Option B, Direct Wire:
NOTE: A grounded 3 prong outlet is required inside a cabinet
next to the dishwasher cabinet opening.
1 | Power Supply Cord—Drill hole
SS ;
Optional location
oN
Preferred location
Drill a 1%" (3.8 cm) hole in cabinet side or rear.
See "Product and Cabinet Opening Dimensions" section.
cabinet
Wood cabinet: Sand the hole until smooth.
Metal cabinet: Cover hole with grommet included with power
supply cord kit.
Helpful Tip: Wiring the dishwasher will be easier if you route the
cable into the cabinet opening from the right-hand side.
1 Direct Wire — Drill hole
Optional locatio
Preferréd location
oN
9 |
aA
Drill a 94" (1.9 cm) hole in right-hand cabinet side or rear.
See "Product and Cabinet Opening Dimensions" section.
Wood cabinet: Sand the hole until smooth.
Metal cabinet: Cover hole with grommet (Part Number 302797
- not provided).
Route cable from power supply through cabinet hole (cable
must extend to the right front side of cabinet opening). Tape
cable to the floor in area shown. This will prohibit cable from
moving when dishwasher is moved into cabinet opening.