Publicité
Les langues disponibles
Les langues disponibles
Option C, Waste disposer — with air gap
Option D, No waste disposer — with air gap
Waste disposer — with air gap |
¢ Screw-type clamps
Th.
Disposer inlet
Rubber hose
connector
Drain hose
Drain trap
12
1.
Using a hammer and screwdriver,
knock plug into disposer.
2.
Use needle-nose pliers to remove
plug.
3.
Connect black end of drain hose to
air gap and cut if needed.
NOTE:
Do not cut ribbed section.
4.
Attach drain hose to air gap with
large silver drain hose clamp
(provided). Use pliers to squeeze
clamp open and move into position.
If the drain hose was cut, use a 114"
to 2" (3.8 to 5 cm) screw-type
clamp (not provided).
5.
Use a rubber hose (not provided)
with screw-type clamps (not
provided) to connect from air gap
to disposer inlet.
La rge silver drain
|
hose clamp
with air gap
No waste disposer —
Air gap
- Large'silver drain...
hoseclamp
~~
Rubber hose
connector
Drain hose
Connect black end of drain hose to
air gap and cut if needed.
NOTE: Do not cut ribbed section.
Attach drain hose to air gap with
large silver drain hose clamp
(provided). Use pliers to squeeze
clamp open and move into position.
If the drain hose was cut, use a 114"
to 2" (3.8 to 5.1 cm) screw-type
clamp (not provided).
Use a rubber hose (not provided)
with screw-type clamps (not
provided) to connect from waste
tee to air gap.
Publicité
