Publicité
Les langues disponibles
Les langues disponibles
Channel Frequencies:
EN
CAUTION:
•
The above wireless device may experience electric wave interference, and thus should not be used
for human safety-related services.
5.2 WIRELESS COMMUNICATION SPECIFICATIONS
[EYFLF1RA, EYFLF1RC, EYFLF1RP, EYFLF2RA, EYFLF2RC, EYFLF2RP]
Assembly Qualifier
ø Communication distance between tool and qualifier is horizontally
10 m if there is no barrier in between.
¢ There is a risk of less communication range and/or communication error in conditions
as below.
• Obstacle to disturb radio wave such as metals and/or reinforced concrete between tool and
qualifier.
• Metal cover on qualifier's antenna.
• Operator's body between tool and qualifier.
• Devices creating radio noise such as PC and/or mobile phone near tool and/or qualifier.
¢ Check the conditions below regarding qualifier's location and setting.
• When qualifier is installed or its location is changed, check the signal strength by signal
strength indication lamp.
• If qualifier's reaction speed is significantly slow, change qualifier's location and/or channel
setting.
• If strength of radio signal is weak, change qualifier's location and/or channel setting.
Channel 1
2.410 GHz
Channel 2
2.415 GHz
Channel 3
2.420 GHz
Channel 4
2.425 GHz
Channel 5
2.430 GHz
Channel 6
2.435 GHz
Antenna
Channel 7
Channel 8
Channel 9
Channel 10
Channel 11
Channel 12
ø about 10 m
‒ 30 ‒
2.440 GHz
2.445 GHz
2.450 GHz
2.455 GHz
2.460 GHz
2.465 GHz
Compatible tool
Publicité
