HYDAC International CS1000 Serie Notice D'utilisation Et De Maintenance page 44

ContaminationSensor CS1000
Switching output (SWtOUT)
Analog output (ANaOUT)
Restart measurement, discard changes (CANCEL)
Restart measurement, save changes (SAVE)
HYDAC Filtertechnik GmbH
BeWa CS1000 3247149n fr 2009-02-04.doc
Vue d'ensemble de la structure des menus
Mode "1" (M1)
No settings necessary (NO SET)
Mode "2" (M2)
Switching point (SP1)
Mode "3" (M3)
Measuring Channel (MEAsCH)
Target cleanliness (TARGET)
Mode "4" (M4)
Measuring Channel (MEAsCH)
Target cleanliness (TARGET)
Upper limit (RSTART)
Test cycle time (CYCLE)
Mode "Single" (SINGLE)
fr
Measuring channel (MEAsCH)
Switching function (SwFNCT)
Limits (LIMITS)
ISO (ISO)
NAS (NAS)
ISO (ISO)
NAS (NAS)
Set value (60)
NAS Maximum (NAsMAX)
NAS (NAS)
NAS + Temperature (NAS+T)
Temperature (TEMP)
HDA+ISO (HDaISO)
HDA+SAE / HDA+NAS (HDaSAE HDaNAS)
ISO-class 2µm (ISO 2)
ISO-class 5µm (ISO 5)
ISO-class 15µm (ISO 15)
ISO Code (ISO)
ISO Code + Temperature (ISO+T)
NAS-class 2 (NAS 2)
NAS-class 5 (NAS 5)
NAS-class 15 (NAS 15)
NAS-class 25 (NAS 25)
NAS Maximum (NAsMAX)
NAS (NAS)
ISO-class 2µm (ISO 2)
ISO-class 5µm (ISO 5)
ISO-class 15µm (ISO 15)
ISO Code (ISO)
Temperature (TEMP)
NAS-class 2 (NAS 2)
NAS-class 5 (NAS 5)
NAS-class 15 (NAS 15)
NAS-class 25 (NAS 25)
Beyond limit (BEYOND)
Below limit (BELOW)
Within band (WITHIN)
Outside band (OUTSDE)
No switch (OFF)
Lower limit (LOWER)
Upper limit (UPPER)
Page 44 / 98
2009-02-04