Publicité
Les langues disponibles
Les langues disponibles
6.
Lay the cable set end marked L to the left-hand taillight and disconnect the vehicle-side 6-pole connector and
connect it to the matching counter piece of the cable set. Push the remaining 6-pole socket housing of the cable
assembly onto the corresponding contacts of the taillight.
7.
Lay the remaining cable set end to the right-hand taillight, disconnect the vehicle-side 6-pole connector and
connect it to the matching counter piece of the cable set. Push the remaining 6-pole socket housing of the cable
assembly onto the matching contacts of the taillight.
Connect the ring eyelets of the wires brown to a suitable ground point (if necessary, drill a 3-mm-hole and attach
8.
the leads using the supplied sheet-metal screw). Do not treat the hole with anticorrosive agent.
Fix all the leads with supplied band clips, assemble previously disassembled parts.
Connect accumulator and check all vehicle functions with connected trailer or other
suitable testing device.
Assembly instruction for the customer.
Publicité
