Mounting - Waldmann ABLTL 1 Mode D'emploi

GB Instructions For Use Machine Light ABLTL 1

Mounting

Fig. 12
Fig. 13
45 mm
24
! CAUTION
Danger due to insufficient fas-
tening!
When mounted incorrectly, the
light may fall down.
¾ Mounting to a surface suitable
for mounting only!
¾ Mounting by a skilled electri-
cian only!
NOTICE
Damage caused by the incident
laser beam!
Direct or indirect incidence of a
laser beam may result in the de-
struction of the LED.
¾ Use the light only outside the
range of action of high-perfor-
mance lasers (e.g. cutting laser,
welding laser).
Standard version
The light-supporting hose can be
mounted on a through hole of ap-
proximately 12.5 mm in diameter
(using the enclosed disks and nut)
or directly on the M12 thread (see
Fig. 12).
Light with screw down lash
Mount light in stable position by
means of suitable screws (see
Fig.13).