Kärcher K 6.250 Mode D'emploi page 19

Operation
Scope of delivery
The scope of delivery of your appliance is il-
lustrated on the packaging. Check the con-
tents of the appliance for completeness
when unpacking.
In the event of missing accessories or any
transport damage, please contact your
dealer.
Description of the Appliance
̈ These operating instructions describe
the basic models of the high pressure
cleaners shown on the front cover.
̈ These operating instructions describe
the maximum equipment. Depending
on the model, there are differences in
the scopes of delivery (see packaging).
Illustrations on fold-out
pages!
1 Coupling element for water connection
2 High pressure connection
3 Water connection with integrated sieve
4 Appliance switch "0/OFF"/ „I/ON"
5 Dosage regulator for detergent
6 Storage for trigger gun
7 Transport handle
8 Detergent reservoir with locking lid
9 Storage of detergent reservoir with de-
tergent connection
10 Storage for accessories
11 Storage hook for mains connection ca-
ble
12 Mains cable with mains plug
13 Wheels
14 Trigger gun
15 Lock trigger gun
16 Key to detach the high-pressure hose
from the trigger gun
17 Washing brush
18 Spray lance with Dirtblaster
19 Spray lance with pressure regulation
(Vario Power)
20 High pressure hose
Special accessories
Special accessories expand the possibili-
ties of using your appliance. Please contact
your KÄRCHER dealer for further informa-
tion.
Before Startup
Mount loose parts delivered with appliance
prior to start-up.
Install the storage for hand-spray gun
Illustration
î Place the bottom holder into the recess-
es and push forward until it audibly
lcoks in.
Illustration
î Insert the top holder and push down all
the way.
Install the storage hook for the mains
connection cable
Option
Illustration
î Install the bottom storage hook.
Illustration
î Install the top storage hook.
Install the dosage regulator for deter-
gent
You will need the 2 included screws as well
as a Philips screwdriver PH 2.
Illustration
î Insert both detergent hoses onto the
hose fittings.
Install the dosage regulator and con-
nect using 2 screws.
Install the transport handle
Option
Illustration
î Attach the transport handle, insert the
bolts into the bores and screw them in.
4
-