Multi-Section Cooking - ETNA SM125RVS Mode D'emploi

OPERATION

Multi-section cooking

Programme set in advance
At most 2 sections can be set for cooking. In multi-section cooking, if
one section is defrosting, the item that needs to be defrosted must be
placed in the first section.
Example
You want to defrost food for 5 minutes, and after that 7 minutes of
80% microwave power to cook.
1. Press button twice.
The display shows 'dEF2'.
2. Turn the control knob until '5:00' appears in the display.
3. Press button .
In the display 'P 100' will blink.
4. Press (several times) button
'P 80' appears in the display.
5. Press start button
The power is set to 'P 80'.
6. Turn the control knob until '7:00' appears in the display.
7. Press the start button
A beep is heared and the defrosting begins. The defrostingtime in the
display counts down. If the first section is finished, there will be a beep
again and the second sectionbegins. If the second section is finished,
there will be five beeps.
1. Set the clock first (see page 10).
2. Input the cooking programme. Two stages can be set at most.
Defrosting should always be set as the first stage, if it is included
in the multi-level programme.
Attention: do NOT press the start button
cooking programme.
3. Press button .
In the display the hour figure will flash.
4. Turn the control knob to set the hours.
5. Press button again.
In the display the minute figure will flash.
6. Turn the control knob to set the minutes.
7. Press the start button
If the door is closed and the programmed time arrives, the buzzer will
ring twice and the cooking will start automatically.
EN 15
or turn the control knob until
to confirm the setting.
to start cooking.
to confirm the setting.
Cooking
after setting the