LG LSDTS988 Serie Manuel Du Propriétaire page 38

38 OPERATION
Height Adjustable Upper Rack
The upper rack adjusts up and down. Raise the
upper rack to allow items up to 14" tall in the lower
rack. Lower the upper rack to allow dishes up to 12"
tall in the upper rack. The dishwasher ships with the
upper rack raised.
There are three available positions for adjusting the
height of the upper rack to create more space.
Lowering the Rack:
Hold the rack at the center of each side to support its
weight. Then, push the button on each side to release
the rack and lower it to the lower position.
Raising the Rack:
Lift the rack at the center of each side until the
rack locks into place in the upper position. It is not
necessary to lift the lock levers to raise the rack.
All manuals and user guides at all-guides.com
NOTE
• Raise the upper rack without pushing the buttons
• To set the rack to the middle position, it may be
• Before pushing the upper rack into the dishwasher,
• There is a 2
• After adjusting the rack levels, check that the spray
• With the lower position of the upper rack, check if
• When the upper rack is in the lower position, push
• Pull out the lower rack first, and the upper rack later.
• Raise the upper rack without pushing the buttons
• To set the rack to the middle position, it may be
WARNING
• Before adjusting, ensure the rack is empty of all
dishes. Otherwise dishes may get damaged or
you may get injured.
on each side. Pushing the buttons when raising the
rack will prevent the rack from locking into position.
easier to lower the rack all the way down and then
raise each side of the rack individually until it clicks
into place.
ensure the rack height is the same on both sides.
If the height is not the same on both sides, the
dishwasher door will not shut and the upper spray
arm will not connect to the water inlet.
/ inches (56 mm) gain in height when
1
5
the upper rack is moved to the lower position.
arms are free to rotate.
the bottom part of upper rack including spray arm is
not disturbing items on the lower rack.
in the upper rack first, and the lower rack later.
on each side. Pushing the buttons when raising the
rack will prevent the rack from locking into position.
easier to lower the rack all the way down and then
raise each side of the rack individually until it clicks
into place.