Kärcher K 2.58 M Mode D'emploi page 8

STEP 3:
Connect garden hose to unit's water
inlet.
STEP 4:
Connect garden hose to the cold wa-
ter source and turn water on com-
pletely.
STEP 5:
Plug the Ground Fault Circuit Inter-
rupter (GFCI) into a receptacle.
Press RESET button, indicator
should be "ON".
Press TEST button, indicator should
be "OFF".
Press RESET button for use.
WARNING
Do not use if above test fails.
8
English
All manuals and user guides at all-guides.com
STEP 6:
Unlock the trigger gun safety lock.
Trigger the gun to eliminate trapped
air, wait for a steady flow of water to
emerge from the spray nozzle.
STEP 7:
Turn on the high pressure washer (I/
ON).
The motor starts only if the trigger
of the gun is pulled and shuts off
when the trigger is released.